You may have spent thousands of dollars on wiring and appliances for your home but have you ever taken a precaution?
Have you ever checked if the phase is properly connected to the electrical circuit / switch and socket in your home? That's what we're going to see. The electrical board has a connector / terminal on the right side of the socket. The phase should be connected where P is the symbol and neutral should be connected where the symbol is not on the left side. And the ground e should be connected to the terminal on the top side of the socket.
No need to open the circuit board to check it all. You only need to have one original 230 volt tester. To do this, insert a tester into the circuit board at the right end of the socket. And turn on the operating switch of the socket. OK if the light is turned off in the tester. And if the tester lights up even when the switch is off, your wiring is wrong.
Call a professional electrician immediately to sort out the problem.
If you ignore this, there may be a short circuit at some point. If so, you will switch off. But there will be no benefit. Because there was no phase break
Neutral will break.
Shown in the drawing above.
0 Comments